| 104 |
4 |
2.62" |
2.126" |
2.244" |
3 |
26 |
| Notes: V4 Industrial engine. Used in Bobcat loader. |
Browse Stock |
| 158 |
3 |
3.81" |
2.75" |
3.372" |
4 |
72 |
| Snout: Long Keyway Notes: 2000 & 3000 series |
Browse Stock |
| 201 |
3 |
4.4" |
2.75" |
3.372" |
4 |
80 |
| Notes: Same as 1591 except for the neck. The keyway does not extend all the way down to the gear surface like a 1591. |
Browse Stock |
| 256 |
4 |
4.2" |
2.75" |
3.372" |
5 |
97 |
| Notes: Shaft has no gear in middle to drive counterbalancers. Gas |
Browse Stock |
| 401 |
6 |
4.4" |
2.75" |
3.372" |
7 |
130 |
| Notes: flange designed for two piece rear main seal. Flywheel flange has 6 bolt-holes. 8000, 9000 |
Browse Stock |
| 120, 2.0L |
4 |
3.75" |
2.095" |
2.249" |
3 |
45 |
| Notes: 2N, 8N, 9N Casting # 9N6363A |
Browse Stock |
| 134, 144, 172, 192 |
4 |
3.6" |
2.2978-2.2986" |
2.4969-2.4977" |
3 |
64 |
| Snout: Splined Notes: Pilot hole in rear of shaft WILL NOT accept roller bearing. NAA (Jubilee) GAS engines Model # 600, 700, 800, 900, 601, 701, 801, 901, 2000-4000 Casting # B9NN6303, EAF, CONN, 310372 Gas |
Browse Stock |
| 134, 144, 172, 192 |
4 |
3.6" |
2.298" |
2.498" |
3 |
64 |
| Notes: Shaft has smooth neck for industrial applications. Pilot hole in rear of shaft will accept roller bearing. Casting # DINL Gas |
Browse Stock |
| 134, 144, 172, 192 |
4 |
3.6" |
2.298" |
2.498" |
3 |
64 |
| Notes: Shaft has smooth neck for industrial applications. Pilot hole in rear of shaft will not accept roller bearing. Casting # EAF, CONN, 310372 Gas |
Browse Stock |
| 144, 172, 192 |
4 |
3.6" |
2.298" |
2.498" |
3 |
65 |
| Flange: 6 bolt holes and 1 dowel hole Snout: Splined with 1 key way Notes: Shaft has counterbalancer drive gear on center of shaft. Ford 801D Casting # EZ1L6300BA, B9NN6302B Diesel |
Browse Stock |
| 144, 172, 192 |
4 |
3.6" |
2.298" |
2.498" |
3 |
65 |
| Notes: Shaft has counterbalancer drive gear on center of shaft and a smooth neck. 801D Diesel |
Browse Stock |
| 175, 183, 192 |
3 |
4.2" |
2.75" |
3.372" |
4 |
83 |
| Notes: Keyway does not extend all the way down to gear surface like a 1590 Ford New Holland NH 322T turbo charged engine. Casting # 70-ZTN 87800470 Diesel |
Browse Stock |
| 201, BSD333 |
3 |
4.4" |
2.7496-2.7504" |
3.3713-3.3723" |
4 |
80 |
| Snout: One long keyway that goes from the gear surface to the end of the neck Notes: For early model engines 4000 series Casting # F0NN6303MA, C5NE6303N, C5TE6303, E5NN6306N |
Browse Stock |
| 220, 3.6L |
4 |
4.524-4.528" |
2.4997-2.5005" |
3.0002-3.0010" |
5 |
77 |
| Flange: Flat, Rope-Type Seal, 6 Bolt Holes, 2 Dowel Holes Snout: Stepped, 1 Large Bolt Hole, 1 Long Keyway Notes: Late Model Snout is stepped and 2.772” long Fordson Major, Dorset, Dagenham Tractor Applications Casting # E1ADDNN-E, E1ADDN6303E, E1ADAN6303F, FMB Diesel |
Browse Stock |
| 220, 3.6L |
4 |
4.524-4.528” |
2.4997-2.5005” |
3.0002-3.0010” |
5 |
77 |
| Flange: Flat, Rope-Type Seal, 6 Bolt Holes, 1 Dowel Hole Snout: Straight, 1 Large Bolt Hole, 1 Long Keyway Notes: Early Model Snout is straight (no step) and 3.015” long Fordson Major Diesel & Super Major, Fordson Power Major, Fordson Series D, 4000 Series Tractors, Early Major, Fordson 5000 Super Major. 4 Cylinder, Dorset, Dagenham Tractor Applications Casting # E1ADDN6303F, E1ADDNND, E1ADDNN6303E, E1ADDNN6303D Diesel |
Browse Stock |
| 233, 256, BSD442 |
4 |
4.2" |
2.7496-2.7504" |
3.3713-3.3723" |
5 |
105 |
| Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Key-way Notes: Includes balancer drive gear with “W” style teeth. Check balancer drive gear to determine Early (78-Tooth) or Late (76-Tooth) 5000, 6000 & 7000 series Casting # C5NE6303K |
Browse Stock |
| 240, 242, 254 |
4 |
4.52" |
2.625" |
3.001" |
5 |
80 |
| Notes: 6000 series Tractors with 240, 242 (4 cyl ) & 254 CID Dorset Casting # 27016303E, 713F6303AAA Diesel |
Browse Stock |
| 256, BSD442 |
4 |
4.2" |
2.75" |
3.372" |
5 |
97 |
| Notes: Fits BSD442 engines manufactured after 9/4/86. Balancer drive gear on crankshaft has 76 teeth and is 15mm wide. 5000, 6000 & 7000 series tractors Casting # E5NN6303EA |
Browse Stock |
| 268, BSD444 |
4 |
4.4" |
2.7496-2.7504" |
3.3713-3.3723" |
5 |
103 |
| Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Key-way Notes: Includes balancer drive gear with “W” style teeth. Check balancer drive gear to determine Early (78-Tooth) or Late (76-Tooth) Casting # E5NN6303DA, E5NN6303FA, D9NN6303AA, D9NN61100AA, E5NN6303CA, D9NN6303A |
Browse Stock |
| 268, BSD444 |
4 |
4.4" |
2.75" |
3.372" |
5 |
97 |
| Notes: Balancer drive gear on crankshaft has 76 teeth. Helix cut on center gear is right to left if looking at it from the rear of the crankshaft. Casting # 6303DA |
Browse Stock |
| 268, BSD444 |
4 |
4.4" |
2.75" |
3.372" |
5 |
97 |
| Notes: Fits Ford BSD444 engines manufactured after 9/4/86. Balancer drive gear on crankshaft has 76 teeth and is 15mm wide. Helix cut on center gear is left to right if looking at it from the rear of the crankshaft. Casting # E5NN6303FA, E5NN6303DA?? |
Browse Stock |
| 304, BSD450 |
4 |
5" |
2.75" |
3.372" |
5 |
44 |
| Notes: Shaft has a 76 tooth gear made onto center of shaft. Ford 6640 non-turbo and 7740 turbo Tractor Casting # E9NN6303DB |
Browse Stock |
| 401, BSD666 |
4 |
4.4000" |
2.7496-2.7504" |
3.3713-3.3723" |
5 |
80 |
| Flange: Flat, 6 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Keyway Notes: Note Field D Series, Dorset, Dagenham Industrial Applications Casting # 713F6303AAA, 2701E6303, E3HN6303AA, E3HN6303AB, E6HN6303CB, E6HN6303CC, C7NN6303, C7NN6303A Diesel |
Browse Stock |
| 401D, 6.6 |
6 |
4.4" |
2.75" |
3.372" |
7 |
132 |
| Flange: 6 bolt-holes lip type seal surface for use in tractor engines Notes: Casting # C7NN-6303, E9HN6303AB |
Browse Stock |
| 68, K773 |
3 |
3.15" |
1.888" |
2.676" |
4 |
30 |
| Notes: Ford 1510 tractor Diesel |
Browse Stock |
| D175, BSD329, D183, D192 |
3 |
4.2" |
2.7496-2.7500" |
3.3713-3.3723" |
4 |
83 |
| Flange: Centering ring with 6 bolt holes and 1 dowel hole Snout: Keyed with 1 bolt hole Notes: 2000, 3000 & 4000 series Casting # E0NN6303AA, C5NE6303L, C5NE6303R, C5NE6305, EN438 |
Browse Stock |
